Only few watches can endure the decades and retains up to this day, while the so-called outstanding watches are really very rare. However, if a chronograph masterpiece can span 80 years, it must be the original Reverso watch. By means of its charming reverso case design, this Reverso watch can be called the real symbolic masterpiece. In the upcoming of the 80 years anniversary of this legendary Jaeger-LeCoultre Reverso replica watch, Jaeger-LeCoultre replica specially endows this watch with a new look, releasing the Reverso Minute Repeater watch.Today, Reverso minute repeater watch with its unique three questions watch the three-stripe, rectangular flip-style case, fine circular contour, and the perfect case when sliding into the chassis, not an iota of its appeal diminished.
Jaeger-LeCoultre’s workshop successfully manufactures this exquisite reverso case design, coordinating with the city of Le Sentier, Switzerland Jaeger-LeCoultre Reverso Minute Repeater replica watch factory manufactured superior movement, created the Reverso watch was born. Now, 80 years of mortal by, 42 of the movement have emerged, but Reverso series is lasting for years. Watch the unique design style to the peak of the decorative arts-based, in addition to transmission of the original designs, but also make appropriate adjustments.
Jaeger-LeCoultre Reverso Minute Repeater watch
Integrate mechanical art case
The anniversary of the Reverso watch can also hide the double-sided dial. To this end, watchmaker clever use of curtains to hide the dial creative design. In the Art Deco era, the top of the watch are using this design can be described as rage. Piece of curtain from the 16 18K white gold strips, each strip width of 2.34 mm block. Curtain and the same case, as can slide back and forth like a stage curtain. Side of the case as a small slide switch parts, put on a real magic shows. Parts start sliding curtain closed, three questions drive mechanism, played a wonderful concerto. When the best quality fake Jaeger-LeCoultre Reverso Minute Repeater watch with a beautiful two-tone spring ring tone reported hours, and quarter of an hour and minute when the curtain fall back to the starting position again, put the dial back coverage.
The top right of the sliding parts of the case drive chain drive, start the minute repeater functions. In a position, sliding the curtain parts and devices on the chain separation, you can move to the case behind the lath and covered the second side. Alternatively, the slats can also be the same as the case, move freely forward and backward parts if the slide from the “minute repeater” mode switch to “silent” mode, the drive will not start when the curtain three questions devices .
Design: the pursuit of classical
For a long time, the plot and the city of Venice to maintain close contact, therefore, decided to build designer coin has 700 years of history, called the Gothic architecture of Venice, one of the most important sign of the Government House (Palazzo Ducale), will this world-renowned The geometry of classical architecture into the watch design, the Reverso watch has a similar make of the classic style. He decorated the building’s exterior as a carving patterns into Reverso minute repeater watch the second side of the classic design.
Design team on the traditional hollow dial movement watch for the wave-shaped bridge design symbolizing minute repeater functions played a beautiful melody. At the same time, hour and minute hands gently passing the bridge watch. In the three repeater device, they use different methods to enhance the function of this complex texture of modern technology to bring people – the undulating curves of the bridge watch will watch excellent mechanical construction to show its head, strong design style adds tension , running sound spring panoramic view. Ruthenium layer sound spring into the atmosphere full of modern science and technology.
Original layout of the movement
As the rectangular case Reverso watches, watchmakers have to minute repeater feature a new design layout. The newly developed 944-type movement contains a total of 340 parts, showing the series of rectangular Reverso case applied the latest acoustic technology. At the same time, this new three-chain system is also asking the device to the art of the watchmaker Jaeger-LeCoultre next level. The use of a new aesthetic concept, the plot shows the movement of manufactured home in the field of craft, 180 years to the plot unmatched in this field.
Sound design spring
For best sound, the plot after a few years developed a new sound spring, and priority for the 2007 Master Minute Repeater watch. The unique sound spring alloy material, forming one cross-section of the square rather than circular, and therefore a greater contact surface with hammers, knocking more powerful. However, Reverso minute repeater watch, the watchmaker must seek for the movement of sound rectangular spring. Thus, they watch this two-tone reed design a special corner style, in order to eliminate sharp corners, and inhibit the free dissemination of Sasser.
Sound transmission
According to the traditional watchmakers sound dispersion technology, the sound spring connected with the case. Start tapping device, the curtain is also active at this time if you can transfer sound vibrations to the 18K gold case, the minute repeater device can achieve the best sound field, the release of the full and harmonious melodies. As a result, experts abandoned the famous “crystal spring sound” device. In such a device, sound coverage in the spring and watch crystal glass foil connected. Experts concluded that if the vibration is passed only through the crystal, when the sound when struck by the spring, over the sound curtain quickly spring, will produce subtle changes in sound.
Hammers system
Sound mechanical principles watch the birth of a century ago, the watchmaker to make perfection, have revolutionized the percussion hammer systems and sound equipment. They designed a unique dual-axis system, connect an active lever, the system starts, hammers acceleration, tilting up to touch a little finger, then, the Ministry of active lever is released, so speed percussion hammers. This tap can release the spring force nearly 80% of energy, while the traditional hammers system can only use the original power less than 10% -30% of energy. Watchmaker also set up a gossamer spring, with just a spin button can adjust the hammers.
Mute regulator
Coordination with the ratchet gear operation, as the scene of wonderful harmony wrist ballet, through Reverso minute repeater watch’s hollow dial. Jaeger-LeCoultre watchmakers unremitting efforts, only to listen to those who offer an accurate and will not break the musical melody. In traditional timing device, the cyclical rhythm of gear will produce audible interference. On the contrary, Reverso minute repeater watch with a centrifugal flywheel (Mute) regulator to control the release of the barrel of energy, in order to adjust throughout the entire process of mechanical percussion velocity.
Reverso minute repeater watch’s silent regulator is different from traditional devices during operation does not interfere with three repeater melodic noise, with a platinum weight lever slightly outward extension of the sapphire fixed on the walls, and the same as the drum brake, slowing the flow of energy to rely on centrifugal force.
Minute repeater
Watch the traditional minute repeater case by pressing the side of the sliding parts start minute repeater. Pressed, the spring and release the sound device on the chain. As before, “Case” section, Reverso minute repeater watch will start the process by a simple change like a slide opening opera-like curtain slowly rises. This method is more complex and more breathtaking. The structure also incorporates critical “all-or-nothing” spring structure, by definition, can guarantee the three asked the device only in the barrel full tilt when the RBI timekeeping to avoid the three asked the device to stop midway due to power exhaustion, caused by timekeeping error.
Movement
Jaeger-LeCoultre 944 manual winding mechanical movement, all handmade, assembly, carving.
Vibration frequency: 21 600 times per hour
Number of parts: 340
Power reserve: 35 hours
Number of jewels: 35
Thickness: 5.89 mm, three asked the watch section: 1.85 mm
Double barrel
1000 hours Chronometer Testing
Function:
Hours, minutes, double-sided display
Minute repeater
Dial:
Hollow front dial, so the bridge watch with a ruthenium-plated device panoramic three questions
Hollow back of the dial, so that the movement sweeping the bridge watch
Case:
18K White Gold
Height: 55 mm
Width: 35 mm
Thickness: 12 mm
Number of parts: 270
Two sapphire crystal, hardness 9, up to 10
Water-resistant: 3 bar (30 m)
Watchband
Alligator strap, 18K white gold pin buckle
Code:
Q2353520, limited edition of 75
